Back to top

Epoxy Top Coat Paint

Epoxy Top Coat Paint
Epoxy Top Coat Paint
Send Inquiry
Product Code : 27
Price And Quantity
  • Minimum Order Quantity
  • No minimum order quantity Liter
Product Description

This reliable and durable two component decorative epoxy top coat paint is ideal to spray or spread brush/roller on metal elements, aluminum as well as their alloys. In addition, it can also be used on industrial machines and production areas walls as well as floors, etc. Developed as per the U.S. MIL standard 22750 TYPE II (last version 30 April 2014), this is highly durable and trusted that can easily work in harsh as well as extreme environments. It has high erosion as well as chemical endurance properties. It comes with a smooth and washable surface that can easily bear light loads. For painting, you should create a protective coat first with high adhesion feature to the primer. This is ideal for painting aviation as well as military sector and space parts that need surface preparation as per the mil-spec demands along with American standard ASTM. 


  • Top coat layer with mechanical strength and high adhesion to the epoxy primer.

  • White and in any color, protects the painted surface in extreme conditions.

  • Perfect top coat for steel, aviation aluminum and it alloys.

  • Protects from oxidation or rust in iron metals.

  • Alkali and acid durable according to the table below and in extreme humidity..

  • Heavy Duty

  • Easy to paint and repaint when required. Dries quickly.

  • Durable against industrial polluted water.

  • Durable against most fuels and oils and jet fuel. .

  • Durable against cleansing and other pungent chemicals.

  • Durable against scratches and hits.

  • Appropriate for industrial walls and floors that light equipment and carts move on it.

  • Covers the painted objects with an even and smooth coat that has no stitches, colorful and decorative that come in various tints and gloss (matte/silk/gloss).

  • Easy to clean and leaves a clean floor and walls after an ordinary wash.

  • High mechanical strength and excellent durability against light load erosion

  • Durable in dry heats of up to 200°C on short periods of time and up to 150°C for long periods of time.

  • Easily repairable at very low costs.

  • Ready for repainting in the same day after 12 hour.

  • High coverage area.

  • High electrical isolation.


  • For internal uses without exposure to direct sun.

  • As top coat for metal parts in industry and aviation/marine parts in aviation and space production, military industry, marine ships and boats internal painting.

  • For upgrading durability to chemicals and chemical or salty corrosive environment.

  • For painting military parts and equipment

  • For industrial machinery and products coating..

  • For walls and floors in industries that don’t have forklift movement,

  • Floors in private car parking areas, garages and warehouses..

  • For floors, for pedestrian in galleries, stores, clubs and etc..

  • For walls and floors in hi-tech buildings, medicine and food industries that need a high sanitation standards.

Technical specifications:

  • Accelerated weather test of 3 of 4 panels for 500 hr. in cycles to ensure no cracks or film defects, alteration of color: delta E < 3

  • Adhesion test – masking tape gluing as well as pressure with 2kg weight for an hour

  • Adhesion to aluminum – 180 kg/cm2

  • Adhesion to concrete – more than concrete strength.

  • Adhesion to iron metal – 210 kg/cm2

  • Contrast ratio min. – 0.9 (for 13538), all others : > 0.95

  • Coverage - 1 liter per 8-10 sqm.. in layer of 50 mic. Dry minimum.

  • Density in”: 1.2-1.45 gm\cm³ (DIN 51575) part B – 0.85-0.95 gm\cm³ (ASTM D-1475)

  • Distilled water resistant – 4 days in temperature 49OC – no imperfections of the film.

  • Erosion endurance: 3200 cycle (BYK Gardener)

  • Fineness of grinding: glossy – min. 7, semi-gloss – min. 6, lusterless – min. 5 (Hegman)

  • Flash point: part A 27°C, Hardener:  at 32°C (DIN 53213, 53213)

  • Flexibility: film 120 microns - 1mm (SHEEN).

  • Gloss 60O – for glossy paints: >90%,  for silky : 15-30%, matte: <5%

  • Hardness:   > 10 Dg  (ERICHSEN) (over 60 DIN 53153)

  • Heat resistance – 121°C for 1 hour with no changes in film quality as well as hue color.

  • Hot oil durability - 121°C for 24 hours with no changes in quality as well as hue color.

  • Humidity cell test - coated Panel 150 microns having scratch (ASTM-1654-00 table 1 rank 10) = zero corrosion from the scratch.

  • Hydraulic oil resistance – 65°C for 24 hours with no changes in film quality as well as hue color. Or 168 hr. in 25°C

  • Infrared reflectance for 34095 only – 450-500 nanometers: <8, 500-600:<10, 600-2700: <8

  • Lubrication oil – immerse in 121°C for 24 hr.

  • Max volatiles - < 340 g/l

  • Number of suggested coats – 1-2

  • Part A – smooth can be combined easily. 

  • Part B – transparent and clear. 

  • Pot life – 4 hours.

  • PULL OFF adhesion test (ASTM D4541) – average 4 tests thickness 110-125 microns thickness averaging 117 microns after 7 days of drying-  1050 Psi

  • Suggested thickness of dry layer – 25-35 mic.

  • Salt spray testing with X scratch through the primer- resistant 1000 hours (ASTM B117-97 table 1 rank 5) development of rust until 5 mm.

  • Solids % - part A in weight 78% . part B 65% in volume (ASTM D-2369)

  • Solvents durability -50 time rubbing using a cloth soaked in MEK with no peeling of paint from the film.

  • Storage durability – 7 days at 60°C with no corruption as well as sagging.

  • Strip ability - > 90%

  • Touch dry time: <4 hr., Hard dry time – <8 hours. (for a50 mic. dry film)

  • Viscosity: after mixing with 340gr/l thinner - <50 sec. #4 ford cups

  • Volume mixture ratio: 2.5:1.

  • Wait time is 10 minutes before painting


  • A combination of quality epoxy resins

  • Additives

  • Fillers

  • Hardener

  • Thinners


  • Clear and any other from RAL catalogue., 595 fed. St., BS and BAM catalogue..

  • White standard (BAC 702).


  • Final hardening: 3- 7 days

  • Final: 24hours

  • Matte

  • Shiny

  • Silk

  • Waiting period between layers:12 hours

Application methods:

  • Brush

  • Roller

  • Spray


  • Thinner 4/100 as MIL-T-81771 Type II

  • Airless – 0-5%.

  • 10-25% as needed for brush or roller. If orange effect appears can add thinner to 35%

  • Spray – 10-25%

Surface preparations:

  • It is necessary to apply on the Epoxyden primer based surface only when it is completely spotless and dry.

  • Old paint – sand well using glass paper

  • Clean with air pressure

  • Sock the drug with thinner

  • Aviation aluminum and alloys – burn as well as passivation as per the MIL-C-5541  MIL-C-81706

  • Big elements – paint removing as well as wash, sanding using polish machines, plastic balls blast or sand blast. Wash it and let it dry.


  • Aluminum – epoxyden stronzium chromate

  • Steel – epoxyden primer rust proof or HB19 or with Rust converter


  • Ensure that the base primer layer is clean, dry, dirt, dust as well as grease free.

  • Open carefully ‘A’ +’B’ paint’s parts and pour in the ratio of 2.5:1 in the necessary amount

  • Floors: stir well and instantly pour on the borders of the floor. With an epoxy roller, carefully spread the matter evenly on the face. It is suggested not to have any tool movement on the surface for minimum 7 days.

  • Metal objects: stir well as well as fill the spray gun or airless and spray the substance consistently on the surface for 50 mic. Let it dry till 4 hours and then second coat can be applied.


  • Air required for 1 liter mixture epoxyden white is:

    • To get 10% LEL=65 M3

    • To get the TLV = 990 M3


3.6+1.4=5 liter.


  • Store in a shaded place

  • Keep it at a temperature of between 15°C-32°C with appropriate ventilation

  • Keep the lids closed tightly.

Trade Information
  • FOB Port
  • Payment Terms
  • Cash Advance (CA), Cash in Advance (CID), Letter of Credit (L/C), Paypal
  • Delivery Time
  • 7 days after payment in ASHDOD port or BEN gurion airport Days
  • Sample Available
  • Yes
  • Sample Policy
  • Free samples are available
  • Packaging Details
  • in case in carton boxes pallets
  • Main Export Market(s)
  • Middle East
  • Main Domestic Market
  • All India
  • Certifications
  • ISO9001-2008